Image 1 of 5
Overview
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option.
The main features are:
- Built-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.
- Battery monitor, indicating state of charge percentage and more data.
- Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.
- Bluetooth for use with our VictronConnect App, for setup and monitoring, including Instant Readout – key data of the BMS at-a-glance.
- Local and remote monitoring using a Victron GX device, for example the Cerbo GX , Cerbo GX MK2 , or Ekrano GX .
The Lynx Smart BMS is part of the modular Lynx Distribution system.
TECHNICAL SPECIFICATIONS
POWER
Show the full description
Battery voltage range: 9 – 60 VDC Maximum input voltage: 75 VDC Supported system voltages: 12, 24 or 48 V Reverse polarity protection: No Main safety contactor continuous current rating: 1000 A continuous Main safety contactor peak current rating: 1200 A for 5 minutes Power consumption OFF mode: 0.3 mA for all system voltages Power consumption in Standby mode: Approximately 0.6 W (50 mA at 12 V) Power consumption in ON mode: Approximately 4.2 W (350 mA at 12 V) depending on the state of the relays Minimum load resistance for pre-charging: 10 Ω and above for 12 V systems | 20 Ω and above for 24 V and 48 V systems AUX output maximum current rating: 1.1 A continuous, protected by resettable fuse Allow-to-charge port Maximum current rating: 0.5 A at 60 VDC, protected by resettable fuse Allow-to-discharge port Maximum current rating: 0.5 A at 60VDC, protected by resettable fuse Alarm relay (SPDT) Maximum current rating: 2 A at 60 VDC
CONNECTIONS
Busbar: M10 (Torque: 33 Nm) (17 Nm for units with a serial number before HQ2340XXXX) VE.Can: RJ45 I/O: Removable multi-connector with screw terminals Battery BTV cables: Male and female circular 3-pole connector with M8 screw ring | Up to 20 batteries can be connected in one system Lynx Distributor fuse monitoring (up to 4 modules): RJ10 (cable ships with each Lynx Distributor)
PHYSICAL
Enclosure material: ABS Enclosure dimensions (H x W x D): 230 x 180 x 100 mm (9.06 x 7.09 x 3.94 in) Unit weight: 2.7 kg (5.95 lbs) Busbar material: Tinned copper Busbar dimensions (H x W): 8 x 30 mm (0.31 x 1.18 in)
ENVIRONMENTAL
Operating temperature range: -40 °C to +60 °C Storage temperature range: -40 °C to +60 °C Humidity: Max. 95 % (non-condensing) Protection class: IP22
STANDARDS
Safety: EN-IEC 63000:2018 EMC: EN-IEC 61000-6-3:2007/A1:2011/AC:2012 QMS: NEN-EN-ISO 9001:2015
Part Number/s: LYN034170210
Specifications
| Weight | 6.5 lb |
|---|---|
| Dimensions | 4.33 × 11.81 × 7.48 in |
| Brand | Victron Energy |
|---|---|
| SKU | LYN034170210 |
Questions and answers
No questions about this product have been answered yet. Ask the first one.
Compare with similar items
| Overview | ||||
|---|---|---|---|---|
| Price | $1,071.00 | $1,071.00 | $906.95 | $803.25 |
| Availability | In stock | In stock | In stock | In stock |
| Brand | Victron Energy | Victron Energy | Victron Energy | Victron Energy |
| Physical | ||||
| Weight | 6.5 lb | 5.51 lb | 5 lb | 5 lb |
| Dimensions | 4.33 × 11.81 × 7.48 in | 4.33 × 11.81 × 7.48 in | 12 × 7.5 × 4 in | 12 × 7.5 × 4 in |
| Warranty and compliance | ||||
| Warranty | Not listed | Not listed | Not listed | Not listed |
| Certifications | Not listed | Not listed | Not listed | Not listed |
| Identifiers | ||||
| SKU | LYN034170210 | LYN034170310 | LYN034160200 | LYN034160210 |
