EPOCH 12V 460Ah V2 Elite Series – Heated & Bluetooth & Victron Comms LiFePO4 Battery

Voltage

Voltage: 12.8V Max Charge Voltage: 14.6V Operating Voltage Range: 10.0 – 14.6V

Temperature

Charge Temp Range: -20°C (-4°F) / 55°C (131°F) (with heating) Discharge Temp Range: -20°C (-4°F) / 60°C (140°F) Storage Temp: 0°C (32°F) / 35°C (95°F)

WEIGHT AND DIMENSIONS

Weight: 97 lbs

DIMENSIONS

Length: 20.75 (inches) Width: 8.5 (inches) Height: 12 (inches)

For Use with Victron Communications, Alternator Charging, or Solar Charging:

Bulk/Absorption Voltage: 14.4V Absorption Time: 15–30 minutes Float Voltage: 13.6V Equalization: Disabled Temperature Compensation: Disabled Charge Rate: 0.2–0.5C (92–230A)

Safety Certifications: UL1642, UL1973, U9540A, IEC62619 :2017, RoHS, CE

RECOMMENDED CHARGING SETTINGS

Batteries employed in non-Victron systems should utilize the following settings:

• Absorption voltage of 14.2V with an absorption time of a minimum of 15 minutes per battery.
• Float voltage of 13.5V
• Equalization off
• No temperature compensation
• To use the V2 Elite with Victron systems. Set up the battery comm harness and gauge as follows:
• Plug with waterproof bung plugged into master blue port.
• RJ45 cable out of master black port and into slave1 blue port.
• RJ45 cable out of slave1 black port and into slave blue port and so on to daisy chain up to 16 batteries in parallel.
• Set dips as per manual.
• Plug in grey RJ45 plug into the Cerbo or Ekrano GX BMS CAN port or if you have the new Cerbo Mk2 plug grey plug inot VE-CAN1 or VE-CAN 2 and change the VE can port speed to 500 KBPS LV.
• To confirm proper reporting, go to the GX/touch screen and confirm the Epoch battery shows up on the device list. Click on the battery line, go to Details. Check to see the number of modules online is equal to the number of batteries installed. Check that the number of AH is equal to the number of AH installed.
• In the GX device/touch screen turn on DVCC, set controlling BMS to Epoch, set battery monitor to Epoch.
• The system should say External Control on the GX touch screen Inverter tile when charging (but not while inverting). The system will automatically cycle to 14.2V with an absorption time of a minimum of roughly 15 minutes per battery followed by 13.5V float voltage.
• It is recommended to manually program the Multiplus, Quattro and all other charge source to these same parameters in case of CAN communication loss.

Over time there will be additional refinements and improvements as needed.

SAFETY CERTIFICATIONS & LISTINGS

IP RATING

IP67

Experience worry-free adventures with our robust IP67 protection. Your battery is completely sealed against dust and can be safely immersed in water up to 1 meter deep for 30 minutes. Whether you’re caught in heavy rain or crossing streams, this military-grade protection ensures your power stays reliable.

• Fully Dustproof
• Waterproof up to 1m
• All-Weather Protection
• Submersible Design

UL1642

Experience unmatched peace of mind with our UL1642 certified batteries. Built to withstand real-world challenges, from accidental drops to extreme temperatures, this certification proves our commitment to keeping you safe in any situation. Your protection is our priority.

• Drop Test Certified
• Crush Test Verified
• Overcharge Protection
• Temperature Control

UL1973

Our UL1973 certification guarantees the highest level of safety and performance for your battery. Designed to meet the rigorous demands of electric vehicles, this certification ensures your battery delivers exceptional power and reliability for all your adventures.

• EV Ready
• High Performance
• Long-Lasting
• Safety Certified

IEC 62619:2017

Our batteries comply with IEC 62619:2017 standards, meeting stringent safety requirements for industrial applications. This certification guarantees safe and reliable performance in various industrial settings.

• Industrial Application Safety
• Overcharge Protection
• Short Circuit Prevention
• Robust Performance Standards

RoHS

Our products are RoHS compliant, adhering to the Restriction of Hazardous Substances directive. This ensures our products are environmentally friendly, free from hazardous materials, and safe for both users and the planet.

• Hazardous Substance-Free
• Environmentally Friendly
• Safe Disposal
• Compliance with EU Environmental Standards

CE

Trust in European excellence with our CE certified products. This prestigious mark demonstrates our compliance with the EU’s stringent safety and quality standards, ensuring you receive a premium product that’s recognized and trusted worldwide.

• EU Safety Compliant
• EMC Tested
• Environmental Standards
• Quality Assured